Houston Concrete & Driveway Pros — Free Estimates

For a standard broom-finish concrete driveway, most Houston homeowners pay roughly $6 to $12 per square foot installed, which puts a typical two-car driveway somewhere in the $3,500 to $8,000 range. The exact number depends on the thickness and reinforcement (a driveway needs more than a patio), how much old concrete has to be torn out and hauled away, the shape and slope of the area, and any decorative finish you choose. Stamped, stained, or exposed aggregate driveways cost more. Because every site is different, our local partners provide a free on-site measurement and a written quote before any work begins.

Both work well here, and the right choice depends on your budget and priorities. Poured concrete is usually less expensive up front, faster to install, and gives you a solid, low-maintenance surface — but it can crack as Houston clay soil swells and shrinks, and a repair is harder to hide. Pavers cost more and take longer to lay, but they flex with ground movement, individual units can be lifted and reset if one settles, and they offer more design options. For most Houston homeowners wanting durability at a reasonable price, a properly poured and reinforced concrete driveway is the practical choice; pavers are worth the premium if you want the look and easy spot repairs.

A well-installed concrete driveway typically lasts 25 to 30 years or more, even in Houston. The biggest factors in getting the full lifespan are proper thickness and steel or fiber reinforcement, a well-compacted base, control joints cut to manage cracking, and periodic sealing to keep moisture out. Houston’s expansive clay and heavy rains are hard on concrete, so drainage that carries water away from the slab matters too. Neglected concrete that was poured thin, on a poor base, and never sealed can start failing in 10 to 15 years, which is why the quality of the install makes such a difference.

Houston sits on highly expansive clay that swells when it’s wet and shrinks when it’s dry. Our climate runs that soil through extreme cycles — heavy rains and flooding, then long, hot droughts — so the ground under a slab is constantly moving up and down. That movement, combined with normal concrete shrinkage as it cures, is what causes the cracks you see in driveways, patios, and slabs across the area. Good installation fights this with a compacted base, proper thickness, steel or fiber reinforcement, and control joints that direct cracking to hidden, planned locations. You can’t stop clay from moving, but a quality pour and good drainage dramatically reduce how much it cracks.

It depends on the cause and extent of the damage. Isolated hairline or surface cracks, minor spalling, and slabs that have simply sunk a bit can often be repaired — crack sealing, resurfacing, or mudjacking to raise a settled slab are far cheaper than a full replacement. Replacement makes more sense when the concrete is badly broken into multiple pieces, has heaved or settled unevenly across the whole slab, is crumbling from deep deterioration, or is at the end of its life. A quick on-site look tells the real story; our partners will tell you honestly when a repair will hold and when your money is better spent on a new pour.

For a lot of homeowners, yes. Stamped concrete gives you the look of stone, brick, or pavers — for patios, pool decks, and driveways — at a lower cost than the real materials, and as a single poured slab it’s easier to maintain than individual units. In Houston, the keys to a stamped surface that lasts are a quality base, proper reinforcement to handle clay movement, and regular resealing to protect the color and pattern from our intense sun and rain. Expect to pay a premium over plain concrete, roughly $12 to $20 per square foot. If you want a high-end look without the price of natural stone, stamped concrete is well worth considering.